mirror of
https://github.com/torvalds/linux.git
synced 2024-11-01 13:03:25 +01:00
4f4129e4e2
Core already prints detailed reports on out of memory: WARNING: Possible unnecessary 'out of memory' message Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230415104304.104134-12-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
202 lines
4.5 KiB
C
202 lines
4.5 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* matrox_w1.c
|
|
*
|
|
* Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
|
|
*/
|
|
|
|
#include <asm/types.h>
|
|
#include <linux/atomic.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/list.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pci_ids.h>
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/w1.h>
|
|
|
|
/*
|
|
* Matrox G400 DDC registers.
|
|
*/
|
|
|
|
#define MATROX_G400_DDC_CLK (1<<4)
|
|
#define MATROX_G400_DDC_DATA (1<<1)
|
|
|
|
#define MATROX_BASE 0x3C00
|
|
#define MATROX_STATUS 0x1e14
|
|
|
|
#define MATROX_PORT_INDEX_OFFSET 0x00
|
|
#define MATROX_PORT_DATA_OFFSET 0x0A
|
|
|
|
#define MATROX_GET_CONTROL 0x2A
|
|
#define MATROX_GET_DATA 0x2B
|
|
#define MATROX_CURSOR_CTL 0x06
|
|
|
|
struct matrox_device {
|
|
void __iomem *base_addr;
|
|
void __iomem *port_index;
|
|
void __iomem *port_data;
|
|
u8 data_mask;
|
|
|
|
unsigned long phys_addr;
|
|
void __iomem *virt_addr;
|
|
unsigned long found;
|
|
|
|
struct w1_bus_master *bus_master;
|
|
};
|
|
|
|
/*
|
|
* These functions read and write DDC Data bit.
|
|
*
|
|
* Using tristate pins, since i can't find any open-drain pin in whole motherboard.
|
|
* Unfortunately we can't connect to Intel's 82801xx IO controller
|
|
* since we don't know motherboard schema, which has pretty unused(may be not) GPIO.
|
|
*
|
|
* I've heard that PIIX also has open drain pin.
|
|
*
|
|
* Port mapping.
|
|
*/
|
|
static inline u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg)
|
|
{
|
|
u8 ret;
|
|
|
|
writeb(reg, dev->port_index);
|
|
ret = readb(dev->port_data);
|
|
barrier();
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline void matrox_w1_write_reg(struct matrox_device *dev, u8 reg, u8 val)
|
|
{
|
|
writeb(reg, dev->port_index);
|
|
writeb(val, dev->port_data);
|
|
wmb();
|
|
}
|
|
|
|
static void matrox_w1_write_ddc_bit(void *data, u8 bit)
|
|
{
|
|
u8 ret;
|
|
struct matrox_device *dev = data;
|
|
|
|
if (bit)
|
|
bit = 0;
|
|
else
|
|
bit = dev->data_mask;
|
|
|
|
ret = matrox_w1_read_reg(dev, MATROX_GET_CONTROL);
|
|
matrox_w1_write_reg(dev, MATROX_GET_CONTROL, ((ret & ~dev->data_mask) | bit));
|
|
matrox_w1_write_reg(dev, MATROX_GET_DATA, 0x00);
|
|
}
|
|
|
|
static u8 matrox_w1_read_ddc_bit(void *data)
|
|
{
|
|
u8 ret;
|
|
struct matrox_device *dev = data;
|
|
|
|
ret = matrox_w1_read_reg(dev, MATROX_GET_DATA);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void matrox_w1_hw_init(struct matrox_device *dev)
|
|
{
|
|
matrox_w1_write_reg(dev, MATROX_GET_DATA, 0xFF);
|
|
matrox_w1_write_reg(dev, MATROX_GET_CONTROL, 0x00);
|
|
}
|
|
|
|
static int matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
struct matrox_device *dev;
|
|
int err;
|
|
|
|
if (pdev->vendor != PCI_VENDOR_ID_MATROX || pdev->device != PCI_DEVICE_ID_MATROX_G400)
|
|
return -ENODEV;
|
|
|
|
dev = kzalloc(sizeof(struct matrox_device) +
|
|
sizeof(struct w1_bus_master), GFP_KERNEL);
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
dev->bus_master = (struct w1_bus_master *)(dev + 1);
|
|
|
|
/*
|
|
* True for G400, for some other we need resource 0, see drivers/video/matrox/matroxfb_base.c
|
|
*/
|
|
|
|
dev->phys_addr = pci_resource_start(pdev, 1);
|
|
|
|
dev->virt_addr = ioremap(dev->phys_addr, 16384);
|
|
if (!dev->virt_addr) {
|
|
dev_err(&pdev->dev, "%s: failed to ioremap(0x%lx, %d).\n",
|
|
__func__, dev->phys_addr, 16384);
|
|
err = -EIO;
|
|
goto err_out_free_device;
|
|
}
|
|
|
|
dev->base_addr = dev->virt_addr + MATROX_BASE;
|
|
dev->port_index = dev->base_addr + MATROX_PORT_INDEX_OFFSET;
|
|
dev->port_data = dev->base_addr + MATROX_PORT_DATA_OFFSET;
|
|
dev->data_mask = (MATROX_G400_DDC_DATA);
|
|
|
|
matrox_w1_hw_init(dev);
|
|
|
|
dev->bus_master->data = dev;
|
|
dev->bus_master->read_bit = &matrox_w1_read_ddc_bit;
|
|
dev->bus_master->write_bit = &matrox_w1_write_ddc_bit;
|
|
|
|
err = w1_add_master_device(dev->bus_master);
|
|
if (err)
|
|
goto err_out_free_device;
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
dev->found = 1;
|
|
|
|
dev_info(&pdev->dev, "Matrox G400 GPIO transport layer for 1-wire.\n");
|
|
|
|
return 0;
|
|
|
|
err_out_free_device:
|
|
if (dev->virt_addr)
|
|
iounmap(dev->virt_addr);
|
|
kfree(dev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void matrox_w1_remove(struct pci_dev *pdev)
|
|
{
|
|
struct matrox_device *dev = pci_get_drvdata(pdev);
|
|
|
|
if (dev->found) {
|
|
w1_remove_master_device(dev->bus_master);
|
|
iounmap(dev->virt_addr);
|
|
}
|
|
kfree(dev);
|
|
}
|
|
|
|
static struct pci_device_id matrox_w1_tbl[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400) },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, matrox_w1_tbl);
|
|
|
|
static struct pci_driver matrox_w1_pci_driver = {
|
|
.name = "matrox_w1",
|
|
.id_table = matrox_w1_tbl,
|
|
.probe = matrox_w1_probe,
|
|
.remove = matrox_w1_remove,
|
|
};
|
|
module_pci_driver(matrox_w1_pci_driver);
|
|
|
|
MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
|
|
MODULE_DESCRIPTION("Driver for transport(Dallas 1-wire protocol) over VGA DDC(matrox gpio).");
|
|
MODULE_LICENSE("GPL");
|