linux/arch/powerpc/sysdev/dart_iommu.c
Alexey Kardashevskiy 201ed7f327 powerpc/powernv/ioda2: Create bigger default window with 64k IOMMU pages
At the moment we create a small window only for 32bit devices, the window
maps 0..2GB of the PCI space only. For other devices we either use
a sketchy bypass or hardware bypass but the former can only work if
the amount of RAM is no bigger than the device's DMA mask and the latter
requires devices to support at least 59bit DMA.

This extends the default DMA window to the maximum size possible to allow
a wider DMA mask than just 32bit. The default window size is now limited
by the the iommu_table::it_map allocation bitmap which is a contiguous
array, 1 bit per an IOMMU page.

This increases the default IOMMU page size from hard coded 4K to
the system page size to allow wider DMA masks.

This increases the level number to not exceed the max order allocation
limit per TCE level. By the same time, this keeps minimal levels number
as 2 in order to save memory.

As the extended window now overlaps the 32bit MMIO region, this adds
an area reservation to iommu_init_table().

After this change the default window size is 0x80000000000==1<<43 so
devices limited to DMA mask smaller than the amount of system RAM can
still use more than just 2GB of memory for DMA.

This is an optimization and not a bug fix for DMA API usage.

With the on-demand allocation of indirect TCE table levels enabled and
2 levels, the first TCE level size is just
1<<ceil((log2(0x7ffffffffff+1)-16)/2)=16384 TCEs or 2 system pages.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190718051139.74787-5-aik@ozlabs.ru
2019-08-19 13:20:23 +10:00

441 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* arch/powerpc/sysdev/dart_iommu.c
*
* Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
* Copyright (C) 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>,
* IBM Corporation
*
* Based on pSeries_iommu.c:
* Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
* Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
*
* Dynamic DMA mapping support, Apple U3, U4 & IBM CPC925 "DART" iommu.
*/
#include <linux/init.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
#include <linux/suspend.h>
#include <linux/memblock.h>
#include <linux/gfp.h>
#include <linux/kmemleak.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/iommu.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/cacheflush.h>
#include <asm/ppc-pci.h>
#include "dart.h"
/* DART table address and size */
static u32 *dart_tablebase;
static unsigned long dart_tablesize;
/* Mapped base address for the dart */
static unsigned int __iomem *dart;
/* Dummy val that entries are set to when unused */
static unsigned int dart_emptyval;
static struct iommu_table iommu_table_dart;
static int iommu_table_dart_inited;
static int dart_dirty;
static int dart_is_u4;
#define DART_U4_BYPASS_BASE 0x8000000000ull
#define DBG(...)
static DEFINE_SPINLOCK(invalidate_lock);
static inline void dart_tlb_invalidate_all(void)
{
unsigned long l = 0;
unsigned int reg, inv_bit;
unsigned long limit;
unsigned long flags;
spin_lock_irqsave(&invalidate_lock, flags);
DBG("dart: flush\n");
/* To invalidate the DART, set the DARTCNTL_FLUSHTLB bit in the
* control register and wait for it to clear.
*
* Gotcha: Sometimes, the DART won't detect that the bit gets
* set. If so, clear it and set it again.
*/
limit = 0;
inv_bit = dart_is_u4 ? DART_CNTL_U4_FLUSHTLB : DART_CNTL_U3_FLUSHTLB;
retry:
l = 0;
reg = DART_IN(DART_CNTL);
reg |= inv_bit;
DART_OUT(DART_CNTL, reg);
while ((DART_IN(DART_CNTL) & inv_bit) && l < (1L << limit))
l++;
if (l == (1L << limit)) {
if (limit < 4) {
limit++;
reg = DART_IN(DART_CNTL);
reg &= ~inv_bit;
DART_OUT(DART_CNTL, reg);
goto retry;
} else
panic("DART: TLB did not flush after waiting a long "
"time. Buggy U3 ?");
}
spin_unlock_irqrestore(&invalidate_lock, flags);
}
static inline void dart_tlb_invalidate_one(unsigned long bus_rpn)
{
unsigned int reg;
unsigned int l, limit;
unsigned long flags;
spin_lock_irqsave(&invalidate_lock, flags);
reg = DART_CNTL_U4_ENABLE | DART_CNTL_U4_IONE |
(bus_rpn & DART_CNTL_U4_IONE_MASK);
DART_OUT(DART_CNTL, reg);
limit = 0;
wait_more:
l = 0;
while ((DART_IN(DART_CNTL) & DART_CNTL_U4_IONE) && l < (1L << limit)) {
rmb();
l++;
}
if (l == (1L << limit)) {
if (limit < 4) {
limit++;
goto wait_more;
} else
panic("DART: TLB did not flush after waiting a long "
"time. Buggy U4 ?");
}
spin_unlock_irqrestore(&invalidate_lock, flags);
}
static void dart_cache_sync(unsigned int *base, unsigned int count)
{
/*
* We add 1 to the number of entries to flush, following a
* comment in Darwin indicating that the memory controller
* can prefetch unmapped memory under some circumstances.
*/
unsigned long start = (unsigned long)base;
unsigned long end = start + (count + 1) * sizeof(unsigned int);
unsigned int tmp;
/* Perform a standard cache flush */
flush_dcache_range(start, end);
/*
* Perform the sequence described in the CPC925 manual to
* ensure all the data gets to a point the cache incoherent
* DART hardware will see.
*/
asm volatile(" sync;"
" isync;"
" dcbf 0,%1;"
" sync;"
" isync;"
" lwz %0,0(%1);"
" isync" : "=r" (tmp) : "r" (end) : "memory");
}
static void dart_flush(struct iommu_table *tbl)
{
mb();
if (dart_dirty) {
dart_tlb_invalidate_all();
dart_dirty = 0;
}
}
static int dart_build(struct iommu_table *tbl, long index,
long npages, unsigned long uaddr,
enum dma_data_direction direction,
unsigned long attrs)
{
unsigned int *dp, *orig_dp;
unsigned int rpn;
long l;
DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr);
orig_dp = dp = ((unsigned int*)tbl->it_base) + index;
/* On U3, all memory is contiguous, so we can move this
* out of the loop.
*/
l = npages;
while (l--) {
rpn = __pa(uaddr) >> DART_PAGE_SHIFT;
*(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK);
uaddr += DART_PAGE_SIZE;
}
dart_cache_sync(orig_dp, npages);
if (dart_is_u4) {
rpn = index;
while (npages--)
dart_tlb_invalidate_one(rpn++);
} else {
dart_dirty = 1;
}
return 0;
}
static void dart_free(struct iommu_table *tbl, long index, long npages)
{
unsigned int *dp, *orig_dp;
long orig_npages = npages;
/* We don't worry about flushing the TLB cache. The only drawback of
* not doing it is that we won't catch buggy device drivers doing
* bad DMAs, but then no 32-bit architecture ever does either.
*/
DBG("dart: free at: %lx, %lx\n", index, npages);
orig_dp = dp = ((unsigned int *)tbl->it_base) + index;
while (npages--)
*(dp++) = dart_emptyval;
dart_cache_sync(orig_dp, orig_npages);
}
static void allocate_dart(void)
{
unsigned long tmp;
/* 512 pages (2MB) is max DART tablesize. */
dart_tablesize = 1UL << 21;
/*
* 16MB (1 << 24) alignment. We allocate a full 16Mb chuck since we
* will blow up an entire large page anyway in the kernel mapping.
*/
dart_tablebase = memblock_alloc_try_nid_raw(SZ_16M, SZ_16M,
MEMBLOCK_LOW_LIMIT, SZ_2G,
NUMA_NO_NODE);
if (!dart_tablebase)
panic("Failed to allocate 16MB below 2GB for DART table\n");
/* There is no point scanning the DART space for leaks*/
kmemleak_no_scan((void *)dart_tablebase);
/* Allocate a spare page to map all invalid DART pages. We need to do
* that to work around what looks like a problem with the HT bridge
* prefetching into invalid pages and corrupting data
*/
tmp = memblock_phys_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
if (!tmp)
panic("DART: table allocation failed\n");
dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) &
DARTMAP_RPNMASK);
printk(KERN_INFO "DART table allocated at: %p\n", dart_tablebase);
}
static int __init dart_init(struct device_node *dart_node)
{
unsigned int i;
unsigned long base, size;
struct resource r;
/* IOMMU disabled by the user ? bail out */
if (iommu_is_off)
return -ENODEV;
/*
* Only use the DART if the machine has more than 1GB of RAM
* or if requested with iommu=on on cmdline.
*
* 1GB of RAM is picked as limit because some default devices
* (i.e. Airport Extreme) have 30 bit address range limits.
*/
if (!iommu_force_on && memblock_end_of_DRAM() <= 0x40000000ull)
return -ENODEV;
/* Get DART registers */
if (of_address_to_resource(dart_node, 0, &r))
panic("DART: can't get register base ! ");
/* Map in DART registers */
dart = ioremap(r.start, resource_size(&r));
if (dart == NULL)
panic("DART: Cannot map registers!");
/* Allocate the DART and dummy page */
allocate_dart();
/* Fill initial table */
for (i = 0; i < dart_tablesize/4; i++)
dart_tablebase[i] = dart_emptyval;
/* Push to memory */
dart_cache_sync(dart_tablebase, dart_tablesize / sizeof(u32));
/* Initialize DART with table base and enable it. */
base = ((unsigned long)dart_tablebase) >> DART_PAGE_SHIFT;
size = dart_tablesize >> DART_PAGE_SHIFT;
if (dart_is_u4) {
size &= DART_SIZE_U4_SIZE_MASK;
DART_OUT(DART_BASE_U4, base);
DART_OUT(DART_SIZE_U4, size);
DART_OUT(DART_CNTL, DART_CNTL_U4_ENABLE);
} else {
size &= DART_CNTL_U3_SIZE_MASK;
DART_OUT(DART_CNTL,
DART_CNTL_U3_ENABLE |
(base << DART_CNTL_U3_BASE_SHIFT) |
(size << DART_CNTL_U3_SIZE_SHIFT));
}
/* Invalidate DART to get rid of possible stale TLBs */
dart_tlb_invalidate_all();
printk(KERN_INFO "DART IOMMU initialized for %s type chipset\n",
dart_is_u4 ? "U4" : "U3");
return 0;
}
static struct iommu_table_ops iommu_dart_ops = {
.set = dart_build,
.clear = dart_free,
.flush = dart_flush,
};
static void iommu_table_dart_setup(void)
{
iommu_table_dart.it_busno = 0;
iommu_table_dart.it_offset = 0;
/* it_size is in number of entries */
iommu_table_dart.it_size = dart_tablesize / sizeof(u32);
iommu_table_dart.it_page_shift = IOMMU_PAGE_SHIFT_4K;
/* Initialize the common IOMMU code */
iommu_table_dart.it_base = (unsigned long)dart_tablebase;
iommu_table_dart.it_index = 0;
iommu_table_dart.it_blocksize = 1;
iommu_table_dart.it_ops = &iommu_dart_ops;
iommu_init_table(&iommu_table_dart, -1, 0, 0);
/* Reserve the last page of the DART to avoid possible prefetch
* past the DART mapped area
*/
set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map);
}
static void pci_dma_bus_setup_dart(struct pci_bus *bus)
{
if (!iommu_table_dart_inited) {
iommu_table_dart_inited = 1;
iommu_table_dart_setup();
}
}
static bool dart_device_on_pcie(struct device *dev)
{
struct device_node *np = of_node_get(dev->of_node);
while(np) {
if (of_device_is_compatible(np, "U4-pcie") ||
of_device_is_compatible(np, "u4-pcie")) {
of_node_put(np);
return true;
}
np = of_get_next_parent(np);
}
return false;
}
static void pci_dma_dev_setup_dart(struct pci_dev *dev)
{
if (dart_is_u4 && dart_device_on_pcie(&dev->dev))
dev->dev.archdata.dma_offset = DART_U4_BYPASS_BASE;
set_iommu_table_base(&dev->dev, &iommu_table_dart);
}
static bool iommu_bypass_supported_dart(struct pci_dev *dev, u64 mask)
{
return dart_is_u4 &&
dart_device_on_pcie(&dev->dev) &&
mask >= DMA_BIT_MASK(40);
}
void __init iommu_init_early_dart(struct pci_controller_ops *controller_ops)
{
struct device_node *dn;
/* Find the DART in the device-tree */
dn = of_find_compatible_node(NULL, "dart", "u3-dart");
if (dn == NULL) {
dn = of_find_compatible_node(NULL, "dart", "u4-dart");
if (dn == NULL)
return; /* use default direct_dma_ops */
dart_is_u4 = 1;
}
/* Initialize the DART HW */
if (dart_init(dn) != 0)
return;
/*
* U4 supports a DART bypass, we use it for 64-bit capable devices to
* improve performance. However, that only works for devices connected
* to the U4 own PCIe interface, not bridged through hypertransport.
* We need the device to support at least 40 bits of addresses.
*/
controller_ops->dma_dev_setup = pci_dma_dev_setup_dart;
controller_ops->dma_bus_setup = pci_dma_bus_setup_dart;
controller_ops->iommu_bypass_supported = iommu_bypass_supported_dart;
/* Setup pci_dma ops */
set_pci_dma_ops(&dma_iommu_ops);
}
#ifdef CONFIG_PM
static void iommu_dart_restore(void)
{
dart_cache_sync(dart_tablebase, dart_tablesize / sizeof(u32));
dart_tlb_invalidate_all();
}
static int __init iommu_init_late_dart(void)
{
if (!dart_tablebase)
return 0;
ppc_md.iommu_restore = iommu_dart_restore;
return 0;
}
late_initcall(iommu_init_late_dart);
#endif /* CONFIG_PM */